砂漿，是一種建筑材料，用于砌筑和抹灰工程，起粘結、抹平等作用。砂漿常用的有水泥砂漿、混合砂漿、石灰砂漿和粘土砂漿等。那么，砂漿價格多少錢一噸？砂漿怎么拌制和使用？砂漿配合比是多少？砂漿砂漿強度等級分為哪幾種？下面，就和濟南抹面砂漿廠家一起來了解一下吧！

Mortar is a kind of building material, which is used for masonry and plastering works to bond and smooth. Cement mortar, mixed mortar, lime mortar and clay mortar are commonly used. Then, how much is the price of mortar per ton? How to mix and use mortar? What is the mortar mix proportion? What are the strength grades of mortar? Now, let's get to know with Jinan plastering mortar manufacturer!

砂漿是什么？

What is mortar?

砂漿是建筑上砌磚使用的黏結物質，由一定比例的沙子和膠結材料（水泥、石灰膏、黏土等）加水和成。

Mortar is the binding material used for building bricks, which is composed of a certain proportion of sand and binding materials (cement, lime paste, clay, etc.) plus water.

砂漿的作用？

The role of mortar?

砂漿用于砌筑和抹灰工程，可分為砌筑砂漿和抹面砂漿，前者用于磚、石塊、砌塊等的砌筑以及構件安裝；后者則用于墻面、地面、屋面及梁柱結構等表面的抹灰，以達到防護和裝飾等要求。

Mortar is used for masonry and plastering works, which can be divided into masonry mortar and plastering mortar. The former is used for the masonry of bricks, stones, blocks, etc. and the installation of components; The latter is used for plastering of walls, floors, roofs, beam column structures and other surfaces to meet the requirements of protection and decoration.

砂漿分為哪幾種？

What are the types of mortar?

砂漿根據用途分類：可分為砌筑砂漿、抹面砂漿。抹面砂漿包括普通抹面砂漿、裝飾抹面砂漿、特種砂漿。特種砂漿包括防水砂漿、耐酸砂漿、絕熱砂漿、吸聲砂漿等。砂漿根據膠凝材料分類：可分為水泥砂漿、石灰砂漿、混合砂漿?；旌仙皾{又可分為：水泥石灰砂漿、水泥粘土砂漿、石灰粘土砂漿、石灰粉煤灰砂漿等。

Mortar can be classified into masonry mortar and plastering mortar according to its use. The plastering mortar includes ordinary plastering mortar, decorative plastering mortar and special mortar. Special mortar includes waterproof mortar, acid resistant mortar, thermal insulation mortar, sound absorption mortar, etc. Mortar can be divided into cement mortar, lime mortar and mixed mortar according to the classification of cementitious materials. Mixed mortar can also be divided into: cement lime mortar, cement clay mortar, lime clay mortar, lime fly ash mortar, etc.

砂漿配合比？

Mortar mix ratio?

通常所說的1:3水泥砂漿是用1重量水泥和3重量砂配合，實際上忽視了水的成分，一般在0.6左右比例，即應成為1:3:0.6，水泥砂漿的密度為2000Kg/m?。

Generally speaking, 1:3 cement mortar is mixed with 1 weight of cement and 3 weight of sand. In fact, the composition of water is ignored. Generally, the proportion is about 0.6, which should be 1:3: 0.6. The density of cement mortar is 2000Kg/m?.

砂漿強度等級？

Mortar strength grade?

水泥砂漿及預拌砌筑砂漿強度等級可分為M5、M7.5、M10、M15、M20、M25、M30，泥混合砂漿的強度等級可分為M5、M7.5、M10、M15。maigoo小編了解到，水泥砂漿強度一般是根據圖紙和設計要求來確定的。比如圖紙上標明砌筑用砂漿M7.5，你就得使用M7.5的砂漿。

The strength grade of cement mortar and premixed masonry mortar can be divided into M5, M7.5, M10, M15, M20, M25, M30, and the strength grade of mud mixed mortar can be divided into M5, M7.5, M10, M15. Maigoo learned that the strength of cement mortar is generally determined according to the drawings and design requirements. For example, if the drawing indicates M7.5 mortar for masonry, you must use M7.5 mortar.

圖紙上標明是用1：2.5砂漿，你的砂漿水泥砂子的比例就是1:2.5。一般設計圖紙上標明有M5、M7.5、M10、M20，需將施工現場的水泥和砂子送到試驗室做配合比，制作70.7X70.7X70.7試塊一組，28天標準養護后進行抗壓試驗，看看試塊能否達到設計強度。

The drawing indicates that 1:2.5 mortar is used, and the proportion of your mortar, cement and sand is 1:2.5. The general design drawings indicate M5, M7.5, M10 and M20. The cement and sand at the construction site should be sent to the laboratory for mix proportion, and a group of 70.7X70.7X70.7 test blocks should be made. After 28 days of standard curing, the compression test should be carried out to see whether the test blocks can reach the design strength.

砂漿稠度？

Mortar consistency?

與一般意義上的“稀稠”概念不同，水泥砂漿稠度表示的是“流動性”。指砂漿在自重力或外力作用下是否易于流動的性能。其大小用沉入量（或稠度值）（mm）表示，即砂漿稠度測定儀的圓錐體沉入砂漿深度的毫米數。用砂漿稠度測定儀測定的稠度越大，流動性越大。即圓錐體沉入的深度越大，稠度越大，流動性越好。

Different from the general concept of "thin consistency", the consistency of cement mortar represents "fluidity". It refers to whether the mortar is easy to flow under the action of gravity or external force. Its size is expressed by the sinking amount (or consistency value) (mm), that is, the number of millimeters that the cone of the mortar consistency tester sinks into the mortar. The greater the consistency measured by mortar consistency tester, the greater the fluidity. That is, the deeper the cone sinks, the greater the consistency, and the better the fluidity.

有關砂漿的幾個常見問題了解我們就舉例到這里了，您對此有什么問題或者需求，歡迎來我們網站http://m.zzmdwxsh.com留言咨詢！

Here are some common questions about mortar. If you have any questions or needs, please come to our website http://m.zzmdwxsh.com Message consultation!