在建筑施工過程當中，有時需要使用到108建筑膠水，那么108建筑膠水怎么使用的呢？下面和小編一起來學習一下相關知識吧。

In the process of building construction, 108 construction glue is sometimes used. How to use 108 construction glue? Let's learn some relevant knowledge together with Xiaobian.

一、108建筑膠水怎么使用的

1、 108 How to use construction glue

1、若要使用108建筑膠水的話，就應該先把108建筑膠水和粉料根據一定的比例充分的攪拌在一起，再加入適量的水，然后再次進行充分的攪拌，接下來就可以把攪拌好的混合物涂抹在物體表面了。

1. If you want to use 108 construction glue, you should mix 108 construction glue and powder fully according to a certain proportion, then add a proper amount of water, and then fully mix again, then you can apply the mixed mixture on the surface of the object.

2、若要使用108建筑膠水的話，還可以先把適量的建筑膠粉末慢慢的倒入適量的水中，其次應該進行快速的攪拌，讓二者均勻的混合在一起，再放置五分鐘到十分鐘左右。然后根據1:2:4的比例把混合液和水泥以及沙子攪拌在一起，攪拌的同時還需要加入適量的水。攪拌均勻以后，就可以把混合物用于粘貼磚塊或者是進行抹灰施工了。

2. If you want to use 108 construction glue, you can also slowly pour a proper amount of construction glue powder into a proper amount of water, and then quickly mix the two evenly, and then leave it for about five to ten minutes. Then mix the mixture with cement and sand according to the ratio of 1:2:4, and add proper amount of water while mixing. After mixing evenly, the mixture can be used to paste bricks or carry out plastering construction.

二、使用建筑膠水需要注意哪些方面

2、 What should be paid attention to when using construction glue

1、使用建筑膠水之前，一定要先按照規定的比例用量把建筑膠水和相關材料攪拌在一起，并且一定要攪拌均勻，然后才可以使用建筑膠水進行施工。其中添加的固化劑一定要適量，不可以過多或者是過少，否則都會導致建筑膠水的固化效果受到影響。

1. Before using the construction glue, the construction glue and relevant materials must be mixed together according to the specified proportion, and must be mixed evenly before using the construction glue for construction. The curing agent added must be appropriate, not too much or too little, otherwise the curing effect of the building glue will be affected.

2、攪拌好的建筑膠水一定要及時用掉，一旦過了使用期，或者是不小心接觸到環氧膠黏劑的話，則會導致環氧膠黏劑無法再繼續使用，這時即使使用了建筑膠水，也難以達到想要的粘接效果。當建筑膠水涂抹完畢以后，若外露時間很長的話，還會導致膠水的剪切強度有所下降。

2. The mixed construction glue must be used in time. Once the service life is expired or the epoxy adhesive is accidentally touched, the epoxy adhesive can no longer be used. At this time, even if the construction glue is used, it is difficult to achieve the desired bonding effect. After the construction glue is applied, if the exposure time is very long, the shear strength of the glue will also decrease.

使用108建筑膠水的過程中，建議是不要沾到水，否則容易導致108建筑膠水的粘接效果受到影響，使得膠水掉落。更多相關產品您就來咨詢聯系我們http://m.zzmdwxsh.com選購吧！

In the process of using 108 building glue, it is recommended not to touch the water, otherwise the bonding effect of 108 building glue will be affected, and the glue will fall. For more related products, please contact us http://m.zzmdwxsh.com Shop!