Jinan putty powder you may have heard, but some people may still ask: what is putty powder. As a kind of grass-roots building materials, its use is very wide, so what impact does it have on grass-roots materials? Today, Fuhua building materials analyzes this problem for you.

所謂膩?zhàn)臃勰佔佑址Q為填泥，屬于一種厚漿狀涂料。涂施于底漆上或直接涂施于物體上，用以清除被涂物表面上高低不平的缺陷。

The so-called putty powder putty, also known as filling mud, belongs to a thick paste coating. It can be applied on the primer or directly on the object to remove the uneven defects on the surface of the object to be coated.

它由少量的漆基、大量的填料和適量的著色顏料制成。使用的顏料主要是鐵紅、炭黑、鉻黃等。填料主要是重質碳酸鈣、滑石粉等。它可以用局部凹陷填充工作表面或刮掉整個表面。通常在底漆層完全干燥后，將其涂在底漆層的表面。

It is made of a small amount of lacquer base, a large amount of filler and an appropriate amount of pigment. The main pigments used are iron red, carbon black, chrome yellow, etc. The main fillers are heavy calcium carbonate, talc, etc. It can fill the working surface with local depressions or scrape off the whole surface. It is usually applied to the surface of the primer after it has completely dried.

現象：施工完成并仔細干燥后，用手觸摸會掉粉。

Phenomenon: after the construction is completed and carefully dried, the powder will drop when touching with hands.

濟南膩?zhàn)臃郛a(chǎn)生這種現象的原因：

The reasons for this phenomenon are as follows

1、內墻膩?zhàn)臃蹝伖鈺r(shí)間不好，表面已經干燥，然后拋光處理將去除粉末;

1. The internal wall putty powder polishing time is not good, the surface has been dry, and then polishing will remove the powder;

2、外墻膩?zhàn)臃埏椕鏁r(shí)涂層相對較薄。夏季高溫條件下，水分揮發快，表層水分不足無法固化，因此容易脫粉。

2. The coating of exterior wall putty powder is relatively thin. Under the condition of high temperature in summer, the moisture volatilizes quickly, and the surface moisture is insufficient to solidify, so it is easy to remove the powder.

3、產品超過保質期，粘接強度大大降低。

3. The adhesive strength of the product is greatly reduced when it exceeds the shelf life.

4、產品儲存不當會大大降低吸濕后的附著力。

4. Improper storage of products will greatly reduce the adhesion after moisture absorption.

5、基層的高吸水率導致膩?zhàn)涌焖俑稍?，沒有足夠的水來固化。

5. The high water absorption of the base causes the putty to dry quickly and there is not enough water to cure.

解決方法：

resolvent:

濟南膩?zhàn)臃?/div>

相關推薦：
• 
  濟南防火石膏粉的防火性能是通過其化學特性和物理特性來實現的
• 
  濟南家用抹面砂漿怎么選？M5和M7.5才是剛需，別花冤枉錢
• 
  濟南膩?zhàn)臃凼褂帽刂汗文佔忧氨馗鷰煾盗耐高@11件事，墻面十年不翻車
• 
  濟南石膏粉避坑！石膏膩?zhàn)颖环Q“甲醛之王”，這些貓膩要分清
• 
  濟南膩?zhàn)臃蹌e亂買！忽略這個細節，裝修必踩坑
• 
  五種辦法教你如何解決濟南石膏粉干的快問題
• 
  外墻膩?zhàn)涌偲鹋荩?個核心成因+實用避坑指南來了
• 
  打破認知！濟南石膏粉不只能裝修，還能做出嫩滑石膏豆腐腦