1. Straightness, use 2m to ruler or test ruler, the wall and ruler are the best seamless, with 2mm error, and the "meter" shape is better for acceptance.

　　2、陰陽角度應垂直于地面成一條直線，用眼睛看不出任何彎曲。尤其是墻紙的墻壁，如果陰陽角度不直，當墻紙在這些地方會出現空鼓。

　　2. The angle of yin and Yang shall be perpendicular to the ground in a straight line, and no bending can be seen with eyes. Especially for the wall of wallpaper, if the angle between yin and Yang is not straight, there will be hollowing when the wallpaper is in these places.

　　3、在工作膩子表面用細砂紙打磨達到反光效果，有金屬反光的感覺。不要擔心涂層或粘貼。只有這樣，涂層才能光滑和光澤的背后的工作。

　　3. Polish the surface of working putty with fine sandpaper to achieve the reflective effect, with the feeling of metal reflection. Do not worry about coating or sticking. Only in this way can the coating be smooth and glossy behind the work.

　　4. 在干膩子上噴些水，觀察膩子是軟化了還是壓碎了。若變化不大則較好，說明膩子的質量和穩定性較好。

　　4. Spray some water on the dry putty and observe whether the putty is softened or crushed. If the change is small, it is better, indicating that the quality and stability of putty are better.

　　5. 檢查膩子表面是否有裂縫。裂縫必須及時處理。檢查墻體與木制品是否有不明顯的界限。假如膩子刮在木制品上，會影響木制品的外觀光線，一定要及時清理。上面面吹膩子也可以通過以上方法接受。檢查窗臺、門框等小面積處，應平整無刮縫。

　　5. Check the putty surface for cracks. Cracks must be treated in time. Check if there is no obvious boundary between the wall and woodwork. If the putty is scraped on the wooden products, it will affect the appearance light of the wooden products, and it must be cleaned in time. Puttying on the upper surface can also be accepted by the above methods. Check the windowsill, door frame and other small areas, which shall be flat without scratch.

　　以上是濟南膩子粉廠家為大家介紹的膩子批刮后要怎么驗收的相關內容，想要了解更多內容，歡迎訪問網站：http://m.zzmdwxsh.comThe above is the relevant content that Jinan putty powder manufacturer introduces to you about how to check and accept putty after it is applied. For more information, please visit the website: http://m.zzmdwxsh.com